A door that won’t close, drags on the floor, has sagged on its hinges, has a stuck lock or is eaten by rust? We usually fix it in place without removing it — adjusting, welding, replacing hinges and locks, and treating rust and repainting, with a clear price before we start.
These are the faults we fix every day — and most are done in the same visit.
We align the door with its frame and strike plate so it closes smoothly and locks securely.
We lift the door and reset the hinges, or trim the excess and refinish it.
We straighten a sagging door and reinforce its hinges and frame.
We weld broken hinges and joints in place and add a reinforcing plate if needed.
Replacing locks, cylinders and handles and aligning them with the door.
Removing rust, welding corroded parts, then primer and a fresh coat of paint.
From a quick adjustment to a full door refurbishment.
Most iron doors last for years after a proper repair — and we’ll tell you straight if replacing is better value.
The gap between door, frame and floor (g) and the hinge position — the first things we check on every door.
We cover these neighbourhoods in north Riyadh and the areas around them — if yours isn’t listed, get in touch.
Photos from our repair and door work — send us a photo of your door and we’ll reply with the fix and a price.
LOCKS
HINGE WELD
WELD REPAIR
MAIN DOOR
VILLA DOOR
DOUBLE DOOR
ENTRANCEWe inspect, find the cause and give you the price before we start.
Clear steps, with the price agreed before we start.
Send a photo or video of the door and your location on WhatsApp.
We find the cause: hinges, frame, floor or lock.
You get the price and options before any work.
We adjust, weld and replace parts in place.
We treat rust, repaint and test the door with you.
If your question isn’t here, call or WhatsApp us.
Usually not. The most common causes are loose hinges, a sagging door or a misaligned strike plate, and we fix them in the same visit.
Yes. Most repairs, like adjusting and welding hinges or replacing the lock, are done with the door in place. We only remove it for major work.
We find the cause first: if it’s the hinges we lift the door and reinforce them; if it’s the floor or the door itself we trim the bottom and refinish it.
Yes. We replace locks, cylinders and handles and align them with the door, and carry common sizes with us.
We remove the rust, weld corroded parts if needed, then apply anti-rust primer and fresh paint.
Send a photo or short video of the door on WhatsApp for an initial price, confirmed after inspection and before any work.
